WMBA.ORG

Westchester Mountain Bike Association
It is currently Wed May 23, 2018 4:59 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon Feb 06, 2017 3:13 pm 
Offline

Joined: Thu Jun 09, 2016 11:07 pm
Posts: 66
Santa Cruz Heckler 5 (2004)

I bought this pre-owned bike last spring and spent most of my time upgrading the forks, bars, brake levers, calipers, pads, dropper post, and tires. This bike was re-built in a shop in Derby, CT so all the bearings and pivots are in good condition.

I also had my LBS perform a 1x10 conversion with a new Shimano Deore shifter, NW chainring, SRAM chain, Wolftooth Goat Link, and e-Thirteen 42T cog. It bears some scuffs and scratches typical of a 13 year frame maintained in good condition. I list it as "excellent" due to the new parts added on. Currently I have "Slime" tubes in the tires.

Ride it XC, dirt-jump, all-mountain, or bikepark, this classic beast can do it all! I have pasted the info and links from the Santa Cruz site for this model; the geometry chart will be of interest to you.

My LBS tech did not grease or apply Loc-tite to the chainring bolts so one of them seized and will not come off. The Torx head got stripped so I just greased the other 3 bolts. When it’s time to remove the bashguard or ring you or your shop can drill it out.

I am in Putnam County and can meet in Westchester, Rockland, and the adjoining borders of Bergen, Orange, Dutchess, and Fairfield counties if buyers are serious.

$1000 OBO (no lowball offers).

I also have a set of brand new, unused or mounted 26” (27mm inner rim width) black PURE aluminum rims on PURE QR hubs (w/ sealed bearings) laced up by Bicycle Wheel Warehouse that would complement this bike for an additional $250. These would be great with 2.3”-2.4” wide tires for the slop, and you can use the current wheels for drier conditions. These wheels are new prototypes that run for $399 and are not currently listed on their website (pics in my other ad since there is a 10 pic limit)

http://www.santacruzbicycles.com/en-US/bike/heckler/5

FRAME MATERIAL 6000 Aluminum Butted 153mm Travel
PAINT COLOR Red
SIZE Medium
REAR SHOCK X-Fusion RL 200 x 57; 125-143mm stroke (new)
FORK RST Titan 140mm travel QR 9mm x 100mm; 1 1/8” Straight Steerer (new)
CRANKS Shimano XT
CHAINRING Race Face NW Single ring 32T Red (new)
B/B Shimano threaded; 68mm - Threaded - ISO
Chainline Spec: 50mm
PEDALS Atom Lab
CHAIN SRAM w/ Quick Link (new)
BASHGUARD Race Face?
FREEWHEEL Shimano 10 Speed
F/D None
R/D SRAM Shimano SLX Shadow Plus (new)
SHIFTER Shimano Deore 10 Speed (new)
BRAKE CALIPERS Shimano Deore M615 (new)
BRAKE ROTORS SRAM 160mm
BRAKE LEVERS Shimano Deore (new)
HEADSET FSA; cup & cone loose bearings
HANDLEBAR Kona XC/BC Riser; 760mm
STEM Giant 70mm
SEATPOST DNM Dropper 30.9mm x 330mm insertion; 110mm travel (new)
(https://www.sethsbikehacks.com/product/ ... seat-post/ )
SEATPOST CLAMP Ginyea 34.9mm (for 30.9mm post); QR Clamp
GRIPS Fuji clamp; black
SADDLE WTB Volt
FRONT HUB Onyx QR 9mm x 100mm
REAR HUB Onyx QR 10mm x 135mm
SPOKES - UNK
FRONT RIM Alex DM20
REAR RIM DT Swiss XR 1.4d
FRONT TIRE WTB Weirwolf TCS 26” x 2.3” (5-6 rides only; might be tubeless ready?)
REAR TIRE Kenda Karma Pro 26” x 2.1” (5-6 rides only; UST tubeless ready; similar to Maxxis Crossmark)

Model Version: 5
Production Start: 2002
Production End: 2007
Suspension/Pivot System: Single Pivot
Material: Aluminum - 6000 series
Rear Wheel Travel: 130 or 143mm* (*See rear shock info)
Size Range: S,M,L,XL
FRAME SPECS
Geometry Chart here
Compatible Forks: 100mm to 160mm total travel - 160mm travel max.
Headtube/Headset: 1-1/8" Straight - External
Seatpost: 30.9mm - Minimum insertion 100mm
Front Derailleur : 34.9mm Top Pull/Top Swing (Low Clamp)
BB Shell Width: 68mm - Threaded - ISO
Chainline Spec: 50mm
Recommended Max Tire Size: 2.5 - may vary by tire and rim model
Brakes: Disc Brake - ISO
160mm
Rear Hub: 10mm x 135mm (QR)
Seatpost Clamp: 34.9mm
SHOCK SPECS
Rear Shock Eye-to-Eye: 7.875"
Stroke: 2.0” or 2.25” - Both are compatible 2.0” = 125mm RWT - 2.25” = 143mm RWT
(200mm x 57)

http://www.santacruzbicycles.com/en-US/ ... ock_setup_

Mounting Bushing Width Front: 22mm
Mounting Bushing Width Rear: 22mm
Mounting Bolt Diameter Front: 8mm
Mounting Bolt Diameter Rear: 8mm
Leverage Ratio: 2.5:1
Rear Shock Setup
Rear Shock Notes
TORQUE SPECS
Fastener
Description
Prep
Torque
Download
Main Pivot Axle Bolts
M8 X 1.25 X 12 low head allen cap screws
Loctite 242
120 inch lbs
13 N.m
Main Pivot Bearing Clamp
M6 X 1.0 X 16 low head allen cap screws
Loctite 242
60 inch lbs
6.7 N.m
Rear Shock Bolt
M8 X 1.25 X 40 allen cap screw with nylock nut
Nyloc nut
120 inch lbs
13.6 N.m
Front Shock Axle Bolts
M5 X 0.8 X 8 allen head cap screws
Loctitie 242
40 inch lbs
4.5 N.m
Dropout To Swingarm
Dropout Chainring Bolts
Loctite 242
80 inch lbs
9 N.m

Attachment:
IMG_0428.JPG
IMG_0428.JPG [ 2.54 MiB | Viewed 746 times ]

Attachment:
IMG_0429.JPG
IMG_0429.JPG [ 1.98 MiB | Viewed 746 times ]

Attachment:
IMG_0430.JPG
IMG_0430.JPG [ 2.37 MiB | Viewed 746 times ]

Attachment:
IMG_0431.JPG
IMG_0431.JPG [ 2.15 MiB | Viewed 746 times ]

Attachment:
IMG_0432.JPG
IMG_0432.JPG [ 2.3 MiB | Viewed 746 times ]

Attachment:
IMG_0433.JPG
IMG_0433.JPG [ 2.55 MiB | Viewed 746 times ]

Attachment:
IMG_0435.JPG
IMG_0435.JPG [ 2.23 MiB | Viewed 746 times ]

Attachment:
IMG_0436.JPG
IMG_0436.JPG [ 2.29 MiB | Viewed 746 times ]

Attachment:
IMG_0437.JPG
IMG_0437.JPG [ 3.01 MiB | Viewed 746 times ]


Attachments:
IMG_0424.JPG
IMG_0424.JPG [ 2.91 MiB | Viewed 746 times ]
Top
 Profile  
 
PostPosted: Fri Mar 03, 2017 3:54 pm 
Offline

Joined: Thu Jun 09, 2016 11:07 pm
Posts: 66
Update: the bike is at Yorktwon Cycles on consignment.


Top
 Profile  
 
PostPosted: Sat Apr 08, 2017 8:25 pm 
Offline

Joined: Thu Jun 09, 2016 11:07 pm
Posts: 66
PURE wheelset has been sold; bike reduced to $900 OBO; still at Yorktown Cycles.


Top
 Profile  
 
PostPosted: Tue Apr 18, 2017 10:27 pm 
Offline

Joined: Thu Jun 09, 2016 11:07 pm
Posts: 66
Bike has been sold, thanks for looking!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group